i have found tons of info on how bad these harness are & tons more info to help me solve this problem but i'm lacking a few things. My new greenbook is on the way, but it probably won't be here till mid/late next week, so i been useing the hanes which really has no wire diagram for that year to speak of... I really need to get this this solved sooner. anyways my harness is burned out, i have replaced all but two wires from that grey connector...

I know The BLY (blue Yellow) wire goes to the a spade clip on the starter, but i notice another BLY (blue yellow) wire that go also gets connected to that same spade clip... where does that other wire go to? Should i just splice the two wires together (one new and one old) on a new Spade clip & hope for the best?

I also have a BLR (Blue Red) wire that is burned out at the grey connector, i can't fine anything that it goes to! Does anybody know where it goes? I can't find anything in my searches for that wire, like it doesn't exsist on a 84... so i checked this car has a manufacture date of 2/84... could this wire be on an 85? this wire has me lost

Black wire goes to the Oil sensor... done

Yellow wire goes to the Temp Sensor...done

Red wire Goes to the ALT...done

Brown wire goes to the Coil.....done

I didn't break apart the harness, i could only imagine just how nasty it is in there, but i will if i have to. so i just been rerunning the wires around the strut towers...I am sure its frowned upon to cut and splice then Crimp & i should go out and blow 700 dollars on a new harness.. but that is almost as much as what he (my father) paid for the whole car, call me cheap but i prefer thrifty. LOL

Any advise on these wires would greatly be appreciated