Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2022

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

1987 740t question...John Sargent maybe?

posted by  cx on  Sat Oct 1 03:47 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 8 07:56 CST 2014
[RELATED]

I am in the process of removing my wiring harness for replacement on a '87 740t. Mounted on the drivers side inner fender(lower strut tower), below the master cylinder there is a black device somewhat cylinder shaped with vacuum lines running from the top section of said device to the bottom section of same. In addition, out the bottom are two more vacuum connections...one running through the firewall into the cabin and the other missing it's vacuum hose. This device also has a triple terminal connector that receives a connection from the wiring harness.
Two questions: 1)what the heck is this device(I've had the car for 5 years and never saw it before and 2) should there be a vacuum line connected to the open vacuum nipple? Thanks in advance for any help.



Dan






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1987 740t question...John Sargent maybe?
posted by  cx subscriber  on Sat Oct 1 03:47 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.