The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Starter motor will not engage from ignition switch 700 1989

There is not +12V at the blue/yellow lead that connects to the solenoid, so I likely do have a break somewhere.

Wire colors are very different between 200 and 700 cars. You have no B/Y wire to the starter solenoid. It is probably Blue/Geen, as shown in my '93 940 diagrams. (900 and 700 are essentially alike, and common circuit wire colors stay the same over many years.

The "Service Socket" on my car has a Blue plug on the end of the pink wire. Yours may have a Black plug, but it should be in the same place (next to the air box, with barely enough slack wire toget at the female flat terminal. There shold be no +12 there untin the ignition switch is turnned to III.


--
Bruce Young
'93 940-NA (current) — 240s (one V8) — 140s — 122s — since '63.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.