The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

turning radius 200 1989

My understanding is that as the steering wheel is turned the power steering pump cuts in until the wheel has no 'twist' or torque applied to it. So when the wheels point in the desired direction the pump stops.

On full lock the pump will stop but if the wheel is wound hard onto the lock the pump cuts in to try and drive the rack further - so the sound everyone should hear is the pump operating normally. On tight turns the tendency is to wind the wheel as far as it will go so as to maintain full lock - so the pump operates continuously but can't move the rack - thus loading the pump giving the 'more stressed sound' - all normal.

BUT doing this too often or for too long will overheat the pump and shorten it's life, when some of the other sounds will be heard. Squealing can be the drivebelt slipping under load (which may be better than heating up the pump).






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.