The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Timing problems, '92 240 w/ B230F engine 200 1992

"I think that is the case... but should that even matter? As long as the rotor button points at the notch when the cam and crank are at 0°, it should be able to start.

Right. That's what I'm suggesting. But in your 1st post, you said the rotor was past the notch, with cam and crank at 0°, didn't you? (see excerpt below)

"Temporarily. . . set no. 1 piston to TDC by turning the pulley until its notch lined up with the "0" mark on the lower timing cover. Noticed that the position of the distributor rotor button indicated that ignition timing was advanced--the button was turned perhaps 10 or 12 degrees past the little notch..."

If that's the case (and cam & crank agree at 0°), just loosen the distributor hold-down and adjust it till the rotor centerline also points at the 0° reference notch.

Forgive me if I've confused the issue. I'll back off for now.
--
Bruce Young
'93 940-NA (current) — 240s (one V8) — 140s — 122s — since '63.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.