The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Good source for headbolts, cap bolts? 140-160

I have NEVER bought a new headbolt. I did twist one off because of dirt or
rust in the hole but it came out easily. I replaced it with a used one.

If your headbolts and capbolts don't appear stretched or damaged (ESPECIALLY
in the threads) I'd go ahead and use them.

Volvo headbolts are very good bolts so you need to replace them (if you have
to buy new ones) with grade 12 bolts, same is true for capbolts.

The OEM bolts are reduced section in the shank to I would prefer them to
regular fastener center bolts. (In fact I would rather use an old OEM bolt
than a new general purpose high strength bolt of equal strength.) They also
have bigger heads, which gives a better bearing on the head top surface.
--
George Downs Bartlesville, Heart of the USA!






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.