The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

drivers window not cranking up properly....tips? 200 1986

I've had to replace a window channel once, for a 244 that had run over the felt/rubber/steel that it's made out of. Not too hard once the right things were greased. If the track is folded over anywhere, that may need to be done.

I've seen lots of 240s with the window separated from the steel channel that holds the glass. That just gets replaced, a good one shouldn't be more than $25 from a junkyard.

It could simply be a loose regulator. Remove the door handle and panel, and look for loose 10mm nuts holding the regulator to the door.

Last, the door could be cracked. This usually only happens to cars with power windows. The inner door skin will crack in the center of the top, and in one or two other spots where the top of the skin meets the window tracks. A quick patch with a MIG welder fixes this easily enough.

Good luck with it!
--
Rob Bareiss, New London CT ::: Roterande Fläkt Och Drivremmar!






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.