The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Floor Mats 200 1993

I've done this using epoxy. I got mine from system 3 resins -- trial kit costs $25bucks and will last you for years for small uses here and there (https://www.ndic.com/systemthree/trial_kits.asp) -- but I think any good marine epoxy will work.

If you have a spot that's chipped, then put some duct tape on the back of the floor mat and pour the mixed epoxy into the hole from the front and let set.

For small cracks, apply the epoxy/glue to the crack with a small spatula from the back side and then tape together across the length of the break till it sets.

If it's a big crack, then use fiberglass (comes with the trial kit) on the back side of the mat to reinforce the weld.

I've used fillers/colorings with this epoxy, and you can get iron oxide powder to mix in (very litle bit!) that will approximate the color of the mats for tan interior. Also, if any excess is sticking out of the weld when you're done, you can cut it off with a sharp knife before it fully sets, and sand it afterward.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.