The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Transfer Pump Gasket and Hose Replacement 200 1981

posted by  philvo on  Wed Mar 19 04:13 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Aug 15 14:26 CST 2014
[RELATED]

You can use regular hose clamps but be careful taking the old clamps off.The pipes the hose fit on are barbed so they don't slide off.Also the piping may be corroded.
I was able to open a pretty badly rusted (16 year old)locking tab with a tool I made from an exhaust clamp and visegrips.You put the u-bolt thru the top of the clamp(flat side)tighten the nuts and then bend in the ends and attach the visegrips to the u-bolt as a handle.I was putting in a used sender/pump and I was able to reuse the gasket and locking tab from the donor car.
--
philvo






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.