The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Scan-Tech sedan taillight assemblies 200

I use a silicone bead around the sealed edges of each light segment. I don't like drilling the hole. I find that the silicone seals it up permanently.
Maybe you also got the wrong light housing. The 84 down 6 panel light looks
the same as the 85 newer light but the bottom corner parking light has different pin locations in each light housing. They are not interchangeable.
Plus the older housing uses a 67 bulb in that location the newer light uses
a 1157. The slight location change of the pins is only about a quarter inch
difference. Drove me crazy till I figured out that some jerk had installed
a 1980 light housing on my 86 244DL.

My aftermarket front turn signal lenses for my 86 244DL have already faded and they are only about 9 months old. I've had other issues with Scan-Tech. You can
check my post from a few days ago.

Dave 82 242ti 280k mi.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.