The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Aftermarket seats / steering whl... 140-160 1968

posted by  aryton on  Tue Jan 28 12:50 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I have a sparco D shape on my '69 142.The way I did it was to fit a removeable hub kit. you pretty much have to plan on not ever putting on the stock setup again unless you replace the upper sterring column. Anyway if you want to proceed I bought a sleeve style quick release wheel hub and it comes with a weld on spline. I got a nice one so it cost 55 bucks, but you can get the nob style ones for about 30. After that I bought the momo adapter for 40 bucks that fits the quick release hub. Then your set to fit any wheel with the six bolt italian pattern. Since the spline is weld on it won't ever come off and I imagine that if I needed to put a new steering column in I would have to cut the upper half in two to get it out.

Goodluck, Aaron






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.