The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: Thanks for all the help w/heater core - now, a new question, heater control valve 200 1983

posted by  someone claiming to be colin osterhout on  Mon Dec 17 06:40 CST 2001 [RELATED]

Is the hose that was supplied with the kit small (~ 6")? If so than that depending on the alignment of the new valve that should be the only special hose. The other hose can be fashioned from stock heater hose, since the bends going up to the top of the heater core (access from glove box) aren't that great, and there is a little room to play around with. This hose is sort of long, I would get about 3 feet and string it down through the glove box, connect to brand *new* valve, then cut the upper portion to length.





USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.