The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: Wiper problem, diagnosis... 700 88

There was a grounding problem with the 700 wipers that was addressed by some by adding an extra ground wire to the motor. You should be able to tell if this has been done by removing the cowl plate and looking for that extra wire.

Also, the pivots can partially sieze and cause intermittent trouble. This is a bugger to deal with - you have to take out the whole wiper mechanism and push (or pound) the steel pivot shafts out of their cast metal pivot bodies and clean it all up. Use lots of grease on re-assembly, and new seals. Given the opportunity, I would install grease nipples and plan to remove the cowl plate and shoot in some grease every year or two.

If you find that your pivots are siezed, I suggest that you get a good used wiper mechanism before starting serious dismantling because you can wreck yours trying to get the pivots out. Wipers that don't work are even worse that wipers that may not work!







USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.