The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: Modifying Waste gate 700 1990

Itsa no brainer...just remove the short 3-4" piece of hose on the turbo itself and replace with the DawesDevice. I used one cable tie to hold the valve to the expansion tank hose. Also used an extra tie as a hose clamp on the turbo nipple(s).

I used it stock out of the box and noticed no difference in boost...apparently it's calibrated for bleed pressure. Be careful when you start screwing it in, however, because it's easy to spike the gauge off the scale (be very careful with your right foot while you're adjusting the boost) of the stock gauge and without a calibrated gauge (I've yet to install it although I have it inna box) it's easy to blow #1 connecting rod, even at 2500 rpm.

One thing I've noted is the area around the turbo pop off valve gets really filthy with oil spray/dirt. The Mitsu apparently vents to atmosphere rather than venting into the incoming air like the Bosch/Porsche hooter valves.







USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.