The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: Wiper Arm Rplacement? 700 89

posted by  someone claiming to be Steve Ringlee on  Mon Nov 27 05:21 CST 2000 [RELATED]

Lift up the plastic cap covering the end of the arm at the point it is secured to the shaft. Beneath this is a nut holding the arm to the rotating shaft. If the nut comes loose, then either the arm can flop loosely or the inner splines on the arm can wear down. To fix the latter, remove the arm and clean out the splines with a wire or small blade. Reinstall and tighten the nut. Use Loctite if it tends to come loose.





USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.