The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: Tries to start....won't continue 200 1982

posted by  someone claiming to be L K Tucker on  Wed Nov 22 07:55 CST 2000 [RELATED]

/// You can bypass the ignition switch by pulling the socket off the switch and jumping the positions with solid copper wire the size of the pins on the switch. Short positive to run then briefly touch the start jumper to the positive position. Careful the starter is immediately engaged. If the fault is the switch the car will run hotwired. There are two screws holding the switch on the lock. The socket is center keyed so you cannot put it back on wrong even if you cannot see it.





USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.