The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Trim panel removal 200 86

posted by  someone claiming to be Zee on  Tue Nov 21 19:02 CST 2000 [RELATED]

tonight I learned not to presume the imtegrated mud flap starting with the 1986 model year took care of rust out behind the rear wheels.

My wagon has a real mess behing the mudflaps....lookes like the PO used to drive this thin in a rock quarry!

I took out three dustpan fulls of dirt and rock from EACH side....before I found the rust!

right where the pre-1986 bodies rust out

So, I need to remove that 8" tall plastictrim panel that extends from the mudflap back along the lower body, where it disappears under the bumber.

Looks like it has a large plastic fastener that should just pry out. But there is something inserted through it at a cross angle, thus preventing it from coming out.

What is the configuration here, and how do I remove this fastener for the trim panel?





USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.