The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: B20E dimensions 120-130 69

Hi,

I had asked the same question on a different list (1800list) so that I could build a crate for shipping. A couple of the guys were kind enough to actually go out and measure. Heres what they found:

------------------------------------------------

> Length from back of the block to tip of waterpump

Including flywheel - approx 25"

> Height from deepest point of the oil pan to top of oilfiller cap

including breather tube out of top of cap - approx 27"

> Width at its widest point (where the starter mounts?)

starter to oil filter - approx 18"

-------------------------------------------------

Hi: I measure roughly 16 in wide 23 in long, not including a water pump or

fan and 26 in high from bottom of oil pan to level of oil filler cap. add

extra room for bracing ect.

-------------------------------------------------

Hope this helps,

Steve






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.