The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: distributor shaft alignment 200 88

Ok here is what i observed on mine: With the offset pinned dog aligned precisely pointing at the two roundish square indentations carefully turn over the distributor and then looking down at the shutter, the edge of an opening on the shutter should be aligned exactly with the center point of the hall sensor. Of course there are two edges to the opening, it will be the edge towards the clockwise direction. Expressed another way, look at the shutter with the distributer held plug to the top and the hall to the bottom it will be the left edge of the opening. Put a pencil mark on the shutter top in line with opening edge to judge where it is as the edge goes out of site when it goes into the hall sensor slot.

Hope you can understand my description and that this works for you.

BTW my distributor has the number 030 on it. Hope yours is the same.

What was the original problem? No start, no spark, no fuel?

Good luck!







USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.