The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: Anyone tried to buy a M90 tranny in the States?

You might try contacting Mike Aaro at Unitek in Sweden. There is a link from the Turbobricks website (www.turbobricks.org). Feel free to write that I suggested you contact him. I think the cost would be something in the $1500 to $2000 range, but you may need more parts like pedal, flywheel, bell housing, and clutch assemblies that would increase the cost. Unitek can also supply a "built" M47 that is more of a direct fit and that can handle much more power than a stock M47. Of course, the old M46s can take a fair amount of power, but the OD needs to be updated to the latest type and even then additional pressure (using extra shims) may be necessary. And with any of these transmissions, a stronger than stock clutch should be used if power is increased more than about 25% over stock. And while you are at it, lighten the flywheel to about 15 pounds.

Philip Bradley






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.