The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: Stumped on 744T poor running 700 87

Well John, you had better get a re-wirin on the harness. First things first. Then check the distributor hall sensor for a signal. If those wires are damaged or the connector is broken it sure won't run very well.

BTW, my can ran fine before harness replacement and it runs fine afterwards. Also check the short connecting hoses for the turbo lines. They could be broken. Also the turbo inlet hose at the turbo inlet. Mine was cooked and mushy. If the all tells the ECU there is a certain amount of air comming in and the air is leaking out under boost, the car won't run too well. Check the Idle Air Bypass hoses for splits. Check the intake manifold gasket for breaks, you can see this if the basket is broken and puched out above or below the manifold. Don't forget to make sure all the large turbo clamps are tight too.

Good luck, w






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.