The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: Rough Idle Drives Me Nuts 200 1979

posted by  someone claiming to be L K Tucker on  Fri Nov 10 03:49 CST 2000 [RELATED]

/// Warning Keith--- The 0-rings in the injector holders are high temp. Use only Volvo parts or insist on the high temp 0-rings inside the holder. These should cost $1+ each not 35 cents. If you use the regular 0-rings they will shrink, harden and be almost impossible to get out withour breaking the holder. There is a thinner 0-ring on the outside of the holder and it can be either type since it can be cut off. The advise on the intake manifold gasket is good, try spraying carb cleaner around the gasket and see if the idle clears up. Poor idle is usually unregulated air. --Replace the 0-rings first.





USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.