The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Cetus Wheels 200 1988

Hey Pete. I don't know 240s, but maybe I can get you started with the math. You'll need to know the width and offset of the 15's already on the car. Start by subtracting the offset of the present wheels from the offset of the Cetus. Then add in half of the width difference, if there is any.

For example, suppose your present wheels are 6" wide with a 25mm offset. In this scenario, the resultant number is 18. That would be the width of spacer needed to keep the center of the new rim exactly where it is. So if you use a 20mm spacer, the centerline moves outboard by 2mm. Then subtract the widths, which would be 1/2" or 12.7mm--let's round up to 13. So the edge of the rim will end up 15mm closer to the fender lip (13 + 2). The inside of the rim will be 11mm closer to the inner wheel well or strut. Then there is the matter of tire selection, which won't matter if you stick with the same size.

--Wilson







USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.