The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Diagnosing intermittent no-start

Welllll I found the problem. It was really bothering me that the pump sounded different. I undid one of the fittings to see what comes out of the in-tank pump line. I wanted to check it for water in the fuel.
Found the problem... the external pump is completely dry and there is 0 output from the in-tank pump.


Good thing I filled the tank up all the way... -cries in gasoline fumes-

This is a b230f 1990 Regina/Rex - but I put an external pump on it after my friend had problems with the fuel system. Now that I've muddled my way through the external plumbing (which was a real adventure) and put a new pump in under the car, I need to convert the tank pump to the bosch version.

I also think the sending unit is misaligned or the pump is installed too low because the tank bung nut won't quite screw in all the way because the sender is sticking out ever so slightly.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.