The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

PV444 Headliner Install 444-544

I just finished the headliner (and windlass) install. It all went well although spread out over a long period because of distractions. The only real problems encountered were:
1. Needed to replace some of the tack strip materil. I used a vinyl but on the next one I would search harder to find the original fiber or paper based material. The vinyl resisted some tacking and did not seem to hold staples as well has the original 65 year old stuff.
2. l did not measure carefully where the dome light wires and sun visor screws come through the headliner. After the liner was in had a hard time finding those locations. Worked out OK but took way more probing than it should have.
3. On the PV444 the headliner uses a cable around the rear window. I could not find a good place to secure the ends and finally just tied the two ends together with a wire loop.

On balance, much easier than I had expected.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.