The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Steel sunroof seal replacement? 900

Thanks for the kind words, Kitty. If the sunroof seal has separated or is damaged then that's an issue I haven't had to deal with. People think the sunroofs are supposed to be a water tight seal, but that's simply not the case. First thing is to ask if the panel at the rear lifts up flush to the roof when fully closed. If not then there's a loose nut on the side rails that needs to be tightened. If water is a problem then all four corner drains of the sunroof tray pan need to be inspected and cleared. Like you say, here in the Pacific Northwest it doesn't take much for a wad of pine needles or whatever to block a far corner of the tray. Lots of info here and elsewhere can be found on inspecting and clearing the drains.
--
Dave -still with 940's, prev 740/240/140/120 You'd think I'd have learned by now






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.