The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Volvo 940 switch panel lamps 900 1994

Hi U.S. Diver,

I haven't had my 940 switches out yet, but have replaced lots of grain of wheat lamps in 850 switches which are likely the same setup.

Once you get the switch out, you'll see a small round (5mm) holder with a screw slot. Twist it about 30 degrees CCW and pry it out with a thin blade screwdriver.

Note how the wires are positioned by the screw slot
Un-do the wires to remove the old lamp and fish in a new lamp and
route the wires as they were, snip off excess wire.
Press back in and twist CW to lock.

What you want is: 14v 3MM grain of wheat lamp 0.91 Watt
You don't want 12V lamps in a 14 volt (or more) car, especially for lamps
that are a PIA to replace.

You can get 30 from china for $10
https://www.ebay.com/itm/402379569498

or goto www.memotronics.com look up "8111" box of 10 $5.21 + shipping
The holders & lamps are available if the holder is gone.
You can call Johannes at Memotronics for info. 903-732-0058

Good luck, Bill






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.