The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Driveshaft vibration after all new components except the shaft... 700 1990

Update -

Took the car to an offroad shop and they told me my pinion angles are less than one half of a degree. They can see (and I have a video) of the vibration. It is in the middle u-joint and a little worse on deceleration than acceleration.

I'm thinking it's either that I damaged the u-joint during install or may have bent or damaged the ears. This is the joint that connects a very short piece of shaft to the sliding spline section.

All that said ... the driveshaft balancing shop should have fixed it before they gave it back to me. I put the u-joints in myself and had a machine shop put on the support bearing and carrier. The balancing shop asked me to bring it back in when I called them.


I'm not sure if it's the itty bitty shaft or the rear shaft that may be at fault here.

In either case, I'm not sure if I should be looking at a bad universal joint or the shaft itself. Anyone else ever seen this?






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.