The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Hard brake pedal with limited actual braking! 1800 1970

Immediately after replacing my defective master cylinder and bleeding the brakes, I ended up with a hard pedal about half way depressed but Limited braking effect! I doubt it is the booster, since it was working fine prior to replacing the master cylinder. Could the issue be related to the fender mounted small brass electric powered slider valve (Brake System Warning Valve) attached to the hydraulic lines just beneath the brake master cylinder? I had disconnected its one wire prior to bleeding, as directed in the shop manual and then reconnected after. Yes, I bench bled the master prior to installing and the reservoirs are full Presently, the Brake Warning Light is illuminated and the car is not safe to drive in traffic. Hopefully, someone has an solution.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.