The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Coil Change 1800 1966

posted by  planetman on  Thu Nov 25 15:45 CST 2021
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 09:29 CST 2014
[RELATED]

Here's what we prefer to do when the coil is bad, but the ignition switch is still functioning.

We remove the coil housing from the armored cable by twisting the coil off the end of the armored cable by clamping the armored cable close to the coil in a bench vise and unscrewing the coil from the armored cable and cutting the wire inside the armored cable as close to the coil as possible.

Then using the same technique, we remove the armored cable from the switch which will leave you with a long easily routable wire to connect to the new coil. You'll still have to extend the wire to reach the positive pole on the new coil.

We then cut the top and bottom from the old coil housing and gut it so you can use the remaining housing to hold a new coil. When cutting and gutting the coil housing, I strongly suggest you wear a particle mask and eye protection. We're not sure what's inside, possibly some PCBs so better safe than sorry.

All the new coils we've used are smaller in outer diameter so to keep the coil from moving around inside the old coil housing, we glue 2 strips of rubber to the outside of the new coil to make a tight slip fit. We like to leave a gap in the ends of the rubber strips and we stagger the gaps to allow for some air circulation.
--
Eric
Hi Performance Automotive Service (formerly OVO or Old Volvos Only)
Torrance, CA 90502
hiperformanceautoservice.com or oldvolvosonly.com






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.