The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

PCV? 1800 1970

Since I've had this car (2001/driven 50K), it's had an oil seeping problem. I have one of those cast aluminum, fin-top valve covers. There's always oil in the groves. The left side of the engine, from the head down, always has a film of oil. And there is always a drop or two on the garage floor, probably dripping from the bell housing.

The csr is a B22 (big bore) and while it runs flawlessly, and I've managed to make accommodations for the overly large cam and resulting low vacuum, it has suddenly occurred to me after reading the manual page on PCV, and the odd, two-way flow it discussed,that my vacuum issue may have something to do with my oil weeping problem.

All the hoses are connected correctly per the factory set-up and the flame trap is clean. If anyone would care to comment on this it would be appreciated.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.