The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

How to be certain of fault code diagnosis! 700 1991

The missing speedo signal could have been from prior the repair. It does not turn on the CEL.

There are many reasons for the O2 sensor problem. If it does get replaced, the 7/8 tool from the auto parts place should work. Use some penetrating oil on the base of the sensor and let it soak. The engine can be warm, but I suggest not hot. I let mine soak for 24 hours, a couple of hours is probably good enough.

The sensor will not want to let go!! But keep after it and it should budge. If it is still hard to turn, more PBBlaster, turn to tighten, then loosen again - just a bit farther than last time. Keep doing this until it starts coming out easily.

The new O2 sensor comes with a coating of anti-seize, do not touch it. It will thread back in easily.
--
Keeping it running is better than buying new






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.