The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Which accumulator/dryer for AC system? 200 1993

Thanks for the replies. Before tackling the the AC system repair, I picked up this nice set of wrenches from Harbor Freight:



I have wrenches up through 19mm, and these pickup from there and I used about half the set for the various large fittings. Worked well.

I'm really afraid to crank down HARD on these fittings since they are aluminum on the dryer and steel (I think) on the hoses. And the torque specs for those connections are less than 35 lbs:



I think I'll take the plastic caps to HD/Lowes and see if they are metric or SAE.

The first few turns are pretty easy, and then it locks up pretty tight after that. In my experience that means a thread mis-match. Before I crank down too hard on these, I'll check the fittings.

Thanks again for the timely advise. Not sure where I would be without the forum members.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.