The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Odometer motor 200 1989

Hi Matt,

I didn't look up the pin numbers but assumed you are talking about the two which drive the stepper motor. They are the open collector (sink to ground) outputs, so if you have hash on the high side of both phases of the waveform that would be consistent with a poor connection (open circuit) in the path from the power supply to the motor's common pin, where the windings are joined.

A poor solder or broken (stressed) motor winding wire would do that, as would a crack in the foil. Move your scope probe to this terminal and toward battery source to find where the voltage drop is occurring. Having the magnetic load of the rotor would have but a subtle effect on the waveform at the driver terminals.


--
Art Benstein near Baltimore

Without geometry, life is pointless.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.