The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Oh. Down to 9 volts is serious! .... 200 1989

"...Also, rpm can affect belt slippage. At idle, the belts might be okay, but when the rpm is higher (when driving the car at speed), they may start to slip..."

I had that very situation once. The alternator was spinning but not nearly fast enough. The belt was slipping but with NO squealing. It was late at night and the only way the fuel pump etc would keep running was to turn off the headlights (parking lights and tail lights on) and tailgate the car in front of me into the next town.

What happens to your voltage measurement when you really load up the electrical system - headlights on high beam, heater blower on high, rear windscreen demist on, radio, etc.? What does it do when you rev the RPMs under these conditions?







USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.