The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Oxygen sensor testing 88 240 200

Simpson 260, Geez that is old! Its input impedance is too low, you need a couple mega ohms, which most $20 DVMs have these days. And you will see the volts bounce around on one of those.
That O2 sensor is probably bad, and if you replace it your car will probably run the same. If you check the voltage with the O2 sensor connected to the ECU, which is just a fine way to do it, you may read about 0.5 volts, which the ECU puts there as a default if the O2 sensor is bad (probably an open circuit).
The car will run fine.
YOur biggest problem is getting the old sensor out of the Cat. After this many years it may just rip a hole in the case if you can grip it and apply enough force.
In which case you are in for a new converter.....
Been there, done that..
--
93 245 Classic, M47, IPD, 91 245SE AW70, 89 745, M46, IPD, Dependents-00 S/V 40s






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.