The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

DIY Alternative to Flaring Tool for Banjo Fitting Install in Fuel Line 200 1990


The tubing flare tool is a good thing to have. However, I've used a DIY tool to do this sort of thing (other holding uses as well).

Take 2 wood blocks and screw or clamp together, a vise works fine for this. Drill an appropriately sized (slightly undersized) hole centered on the line between the blocks. A portion of the hole can be a slightly bigger diameter to accommodate the extended portion of the tubing that the banjo fitting presses into.

Regards,

Tatra Mike
Seattle, WA

1985 244 "Alfsen" (wife's car - the good one)
1984 245 "Buster" (the kid's car, now sold)
1985 245 "Cosmo" (parts car, sold off for move to WA)
1985 245 "Daisy" (back seat down, full of tools, the work truck)
1985 245 "Earl (CA vehicle 'retirement' program)






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.