The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Car starts and dies after 10 seconds 200 1989

posted by  elan vital on  Thu Sep 18 15:59 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Oct 18 22:13 CST 2014
[RELATED]

thanks
I was able to remove the RPM sensor no problem - but good point - i'll replace it (still it would be good to know if it is problematic as it is.

Throttle position sensor checked with ohm meter. I'm not sure if i did the test right but: connected to middle and left connector - when TPS turned all the way left it has continuity (not when turned all the way to the right). when ohm meter connected to the middle and the right connector it shows continuity only when sensor turned all the way to the right - is that correct?

Without AMM it starts but runs for about a second or two only (worse than when connected).

Is the high voltage at the TPS an issue?





USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.