The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Two AW70 problems 200

Occasionally my 1990 sedan's auto transmission doesn't go into overdrive. So I bought IPD's OD solenoid bypass kit in the hope that it will solve the problem. The transmission also tends to shift a little late, so I thought that while I'm installing the OD bypass kit I'd lube and adjust the kickdown cable using the instructions in the Bentley manual. However, the IPD kit instructions suggest that this adjustment method doesn't work well. I'm not sure whether to just slacken off the cable a little (IPDs suggestion), or whether to measure the cable at full throttle according to the Bentley manual. Any wisdom that you can pass on would be appreciated. The car has 130K miles on it, but was neglected for about 50K of those judging by the service history, receipts and attitude of the previous owner. The trans fluid is fairly fresh, synthetic oil, changed 3 times to get as much as the old stuff out as possible.

David






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.