The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Stalling/No start Revisited 200 1990

posted by  chup on  Sat Jun 29 04:49 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Sep 9 14:02 CST 2014
[RELATED]

In my efforts to solve a no start/stalling problem over the past month I have done the following:
Replaced accordion hose
Replace vacuum brake hose and installed new booster check valve
Installed new power stage, fuel pressure regulator, intake manifold gasket and crank position sensor
Cleaned idle air control valve
Checked OBD with an “all clear” result.
I have thoroughly checked and rechecked for vacuum leaks and have found none.
Other than the throttle body, what else could be the cause? The car runs better, but it frequently needs to crank a lot with some pumping on the gas pedal to get started. Especially when warm.
Thanks for your input.





USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.