The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Serious water pump leak. 200 1990

If both mating surfaces are clean and smooth no gasket sealer is required, just the paper. Don't forget to clean the donut mating surface on the underside of the head.

The method I use is:
Install the rubber donut into the pump
Hang the pump on the studs while inserting the pipe into the back of the pump.
Install two nuts on the studs that have slotted holes (finger tight)
Lever the pump upwards using *two* awls inserted into the lower round bolt holes.
When you see that the rubber donut is evenly squished, tighten the slotted hole stud nuts
Install the rest of the bolts and torque evenly

I'm sure there is an extensive writeup in the FAQ. I just did my sisters water pump a few weeks ago and just got a chance to check my work and still bone dry.

Good luck,



--
'90 245 285k, '93 945 296k






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.