The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

760T dropping cylinders under load when warm 700 1990

Have you checked the intake hoses for leaks on the underside? The oil lays up in them and causes the hose to soften from the inside bottom (usually). Run your hand under the intake hose at the manifold entry and see if it is wet or has a hole in it.

The problem could also be the ECT sensor under the third intake runner(good info in the 700/900 FAQs). When they fail the car either runs very rich or very lean when it warms up. It sounds like your air/fuel ratio is somehow getting screwed up after warmup.

Low fuel pressure at the rail could be a problem also. Check the pressure regulator function and check the fuel line pressure.

Regards,

--
Will Dallas, www.willdallas.us, www.willdallas.org, www.willdallas.com, www.dallasprecision.com 86 245 DL 222K miles, 93 940 260K miles, 88 765 GLE 152K miles, 88 780 246K miles






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.