The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Setting Trunk Gaps 120-130

Hi Guys.

I've been busy cutting and chopping apart my 122 and while the front fenders were off for new inner fenders, I decided to reset the front doors...pretty straight forward and now my doors work perfect and my fender gaps are good, but, as one thing always leads to another...I looked at the trunk. The front edge of the trunk looks out of place to me as I can see the weather strip and almost get my index finger in the gap. the sides don't fit very well, but it opens and closes great and I can't see how the damn thing adjusts. I've tried the lid attaching point (the three bolts on the lid) and they didn't do anything while loose. I tried the hinge screws...nothing there either (a little up and down). So is there a way to adjust the trunk lid fit? At this point I will take the lid off and oval the holes if I need to...gross panel fit is not acceptable.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.