The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

91 245 lift-gate glass replacement 200 1991

'91 Year model 240 may very well have the glue in style back glass and not the conventional glass that is held in with the bigger rubber moulding/gasket. I have done a couple of those and they had no glue or butyl type substance in there at all, just the rubber that you reinstall with the cord. Most of your glass shops are just going to glue that sucker back in with a bead of silicone. I did quite a few windshields while working for BMW and aside from cleaning up all of the old sealant it was just a matter of laying down a nice triangular shaped bead all the way around the perimeter of the glass and then with the aid of an assistant you lay the glass in the opening and hold it in place with tape until it dries. The thing that gets me is that the bone yard wants a deposit before they pull the glass, what are they saying that if they crack or break the glass tring to remove it that your deposit is forfeit!?!? Please tell me that isn't so.

mark






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.