Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Correct radiator for 1981 Turbo? 200

posted by  DougC on  Sun May 22 04:43 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Aug 10 08:30 CST 2014
[RELATED]

Old leaking radiator is Volvo PN 463027-0139-8114. The cooling area is just under 1 7/16 inch thick and the side tanks are metal.

Nice donor radiator is Volvo PN 1378179-5177-870. The cooling area is just under 1 1-4 inch thick and the side tanks are plastic.

The receiving car is a 1981 242 Turbo with AC and intercooler. The donor was a 1985 Turbo with intercooler. I can't remember if it had AC, but I think so.

I can see that the donor radiator, being thinner, won't have as much cooling surface area. But is it enough? Is it appropriate to use this thinner one in a Turbo? Should I even consider installing the thinner donor radiator, or should I hold out for the thicker version?

Good sources? Fair junkyard price? I paid $25 for this donor and can save it for another car if necessary. I just need some feedback from you guys because I know the Turbos run hotter. This is our first Turbo.
--
Thanks everyone for all the help, Doug C. 81 242 Brick Off Blocks, turbo bars and wheels, M46; 86 244, B230, 150k , auto.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Correct radiator for 1981 Turbo? [200]
posted by  DougC  on Sun May 22 04:43 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.