Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2018 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

LH 2.4 No response from ECU when using OBD 200

posted by  someone claiming to be tjts1 on  Tue Apr 12 06:26 CST 2005 [RELATED]

An update on the mysterious no start on the 89 240. I tried getting fault codes from the OBD port on the driver side strut tower. There is absolutely no response from the computer. Not even 1-1-1 for no fault in test port 2. In test port 6 there is also no response from AC or TPS. So I guess the 556 ECU is completely fried? Does the ECU ground itself through its mouting to the car? I have it plugged in but it is no screwed into the frame at its mouting point. I checked all the ground points in the engine bay.
Thanks again for the help.
Justin






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New LH 2.4 No response from ECU when using OBD [200]
posted by  someone claiming to be tjts1  on Tue Apr 12 06:26 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.