Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

lucid maybe you can help me please!!!!!!!!!! 200

posted by  rob24085 on  Mon Jan 24 12:30 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

ON the main relay I get 12V to the #30 pole. When I turn the ignition on, the main relay does not close to complete the circuit. I now that if the main relay does not get power the ecu doesnt get power and the amm does not get power either. There for the car will not start. If I make the circuit close with a piece of paper it blows the 25a fuse. What would cause the fuse to blow. Also when I pull the relay out and stick in another relay it also blows the fuse. Even if I stick the same relay in also blows the relay. Is there a short somewhere. I pulled the harness and made sure that there was not a wire touching or crossed. I dont know what to do or check next. Please help. Thanks






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New lucid maybe you can help me please!!!!!!!!!! [200]
posted by  rob24085  on Mon Jan 24 12:30 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.