Hey folks,
My teenage daughter rear ended another vehicle in our ’92 240 with airbag deployment. I’ve collected most of the parts to repair this vehicle along with a used airbag. It appears the orange connector to the old deployed airbag was possible burned or slightly melted. It is difficult to unplug from the deployed airbag. When I got the replacement airbag I got the connector, as well, and snipped as much of the orange cable as I could get from the donor car. My question is; is feasible to solder/splice the orange cable from the donor airbag to the orange wiring harness at the steering wheel, reset the SRS system, and have a safe reliable SRS airbag system again? Thanks in advance for any suggestions or comments.
|