Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2024 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

voltage regulator check 200 1986

posted by  justin21x on  Fri Jul 30 05:02 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue May 13 08:24 CST 2008
[RELATED]

I've just read this in the FAQ.

"Another way to check the integrity of the diodes on a Bosch regulator is to check the voltage readings at the D+ terminal and B+ terminal. The voltage reading should be the same at both terminals. A difference of more than one volt would indicate faulty diodes and the need to replace the regulator."

Which are these terminals? I have the regulator out of the alternator, but I realize I'll need to plug it back in to do this check. The brushes seem fine, but maybe getting a little short, but still well over 5mm or 3/16.

I'm taking the multimeter from work for the weekend and will be trying all the tests in the FAQ.

Thanks!!
Justin
--
'86 240, 180K






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New voltage regulator check [200][1986]
posted by  justin21x  on Fri Jul 30 05:02 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.