Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2005

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Help! Need Steps: Replace Alternator Belt

posted by  Greg R on  Wed May 12 02:56 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Feb 11 23:24 CST 2014
[RELATED]

My B230FT alternator belt snapped and after a lot of searching previous posts and the FAQ I'm confused, since the belt layout varies quite a bit. And here I thought a belt replacement would be a 10-minute job! (LOL) Any help is appreciated.

My car has a single alternator belt which goes to the main crank pulley. But the A/C belt must be removed to install the alternator belt. I have already loosened the alternator mounting and adjuster, but have NO idea how to get the A/C belt off and back on again without messing something up.

(One concern...I bought the correct Gates replacement, according to all the charts, but note that it's a 1030mm belt. Seems identical to the snapped belt in length...but the Owner's Manual claims a "1000mm length" for "drive belts" for the B230FT. I'm guessing the thing will fit since it's the same length as before, but any contrarians out there?)

THANKS

--Greg






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Help! Need Steps: Replace Alternator Belt
posted by  Greg R  on Wed May 12 02:56 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.